Configuring Bridge Mib Extensions - Alcatel OmniStack 8008 User Manual

Configuring Bridge MIB Extensions

The Bridge MIB includes extensions for managed devices that support Traffic
Classes, Multicast Filtering and Virtual LANs. To configure these extensions, use the
Extended Bridge Configuration screen as shown below:
Select the traffic classes operation status on our system. | READ/SELECT
Use <TAB> or arrow keys to move, <Space> to scroll options.
Parameter
Bridge Capability
Extended Multicast
Filtering Services
Traffic Classes
Static Entry Individual
Port
VLAN Learning
Configurable
PVID Tagging
Local VLAN Capable
Alcatel OmniStack 8008
< Extended Bridge Configuration >
Bridge Capability : (Read Only)
Extended Multicast Filtering Services : NO
Traffic Classes
Static Entry Individual Port
VLAN Learning
Configurable PVID Tagging
Local VLAN Capable
Bridge Settings :
Traffic Classes
GMRP
GVRP
<APPLY>
Description
Indicates that the switch does not support the filtering of individual multicast
addresses based on GMRP (GARP Multicast Registration Protocol). Note
that this function is not implemented for the current firmware release.
Indicates that the switch provides mapping of user priorities to multiple traffic
classes. (Refer to 802.1P Configuration.)
Indicates that the switch allows static filtering for unicast and multicast
addresses. (Refer to Network Monitor Menu / Static Unicast Address Table
Configuration and Static Multicast Address Table Configuration.)
This switch uses Independent VLAN Learning (IVL), whereby each port
maintains its own VLAN filtering database.
Indicates that the switch allows you to override the default PVID setting (Port
VLAN ID used in frame tags) and its egress status (VLAN-Tagged or
Untagged) on each port. (Refer to 802.1Q VLAN Port Configuration.)
This switch does not support multiple local bridges (that is, multiple Spanning
Trees).
: TRUE
: DISABLED
: DISABLED
<OK>
Configuring the Switch
: YES
: YES
: IVL
: YES
: NO
<CANCEL>
2-39