Configuring The Serial Port - Alcatel OmniStack 8008 User Manual

Configuring the Serial Port

If you are having difficulties making an out-of-band console connection to the serial
port on the switch, you can display or modify the current settings for the serial port
through the Web agent. Click on the serial port icon in the switch image to display or
configure these settings, as shown below.
Parameter Default
Baud Rate 9600
Time-Out 10 minutes
Data Bits 8 bits
Stop Bits 1 bit
Parity None
Auto Refresh 5 second
Time
Description
The rate at which data is sent between devices.
Options : 2400, 4800, 9600, 19200 bps, and Auto detection.
If no input is received from the attached device after this interval,
the current session is automatically closed.
Range : 0 - 100 minutes; where 0 indicates disabled
Sets the data bits of the RS-232 port.
Options : 7, 8
Sets the stop bits of the RS-232 port.
Options : 1, 2
Sets the parity of the RS-232 port.
Options : none/odd/even
Sets the interval before a console session will auto refresh the
console information, such as Spanning Tree Information, Port
Configuration, Port Statistics, and RMON Statistics.
Range : 0, or 5-255 seconds; where 0 indicates disabled
Panel Display
3-5