Management Setup Menu - Alcatel OmniStack 8008 User Manual

Console Interface

Management Setup Menu

After initially logging onto the system, adjust the communication parameters for your
console to ensure a reliable connection (Serial Port Configuration). Specify the IP
addresses for the switch (Network Configuration / IP Configuration), and then set the
Administrator and User passwords (Console Login Configuration). Remember to
record them in a safe place. Also set the community string which controls SNMP
access to the switch via in-band management software (SNMP Configuration). The
items provided by the Management Setup Menu are described in the following
sections.
Selection
Network Configuration
Serial Port Configuration
SNMP Configuration
Console Login
Configuration
TFTP Download New
Software
Configuration Save &
Restore
2-8
Alcatel OmniStack 8008
< Management Setup Menu >
Network Configuration
Serial Port Configuration
SNMP Configuration
Console Login Configuration
TFTP Download New Software
Configuration Save & Restore
Display or change network configuration.
Use <TAB> or arrow keys to move. <Enter> to select.
Description
Includes IP setup, Ping facility, HTTP (Web server) setup, Telnet
configuration, and MAC address.
Sets communication parameters for the serial port, including management
mode, baud rate, console time-out, and screen data refresh interval.
Activates traps; and configures communities and trap managers.
Sets user names and passwords for system access, as well as the invalid
password threshold and lockout time.
Downloads new version of firmware to update your system (in-band).
Saves the switch configuration to a file on a TFTP server. This file can be later
downloaded to restore the configuration.
<OK>