Configuring Community Names - Alcatel OmniStack 8008 User Manual

Configuring Community Names

The following figure and table describe how to configure the community strings
authorized for management access. Up to 5 community names may be entered.
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
Community Name
Access
Status
Note: The default community strings are "public" with Read Only access, and "private" with Read/Write
access.
Alcatel OmniStack 8008
< SNMP Security >
Community Name
1. public
2. private
3.
4.
5.
<APPLY>
The community name of entry 1.
Description
A community entry authorized for management access.
Maximum string length : 19 characters
Management access is restricted to Read Only or Read/Write.
Sets administrative status of entry to enabled or disabled.
Management Setup Menu
Access
READ ONLY
READ/WRITE
<OK>
Status
ENABLED
ENABLED
<CANCEL>
| READ/WRITE
2-15