Vlan Static List; Vlan Static Table - Alcatel OmniStack 8008 User Manual

VLAN Static List

Use this screen to create or remove VLAN groups.
Parameter
Current
New
Status
Add
Remove
Note: No VLANs are statically configured by default.

VLAN Static Table

Use this screen to modify the settings for an existing VLAN. You can add/delete port
members for a VLAN, disable or enable VLAN tagging for any port, or prevent a port
from being automatically added to a VLAN via the GVRP protocol. (Note that
VLAN 1 is fixed as an untagged VLAN containing all ports on the switch, and cannot
be modified via this screen.)
Parameter
VLAN
Name
Status
Description
Lists all the current VLAN groups created for this system. Up to 256 VLAN
groups can be defined. To allow this switch to participate in external VLAN
groups, you must use the VLAN ID for the concerned external groups.
Allows you to specify the name and numeric identifier for a new VLAN group.
(The VLAN name is only used for management on this system; it is not added
to the VLAN tag.)
Enables/disables the specified VLAN.
Adds a new VLAN group to the current list.
Removes a VLAN group from the current list. If any port is assigned to this
group as untagged, it will be reassigned to VLAN group 1 as untagged.
Description
The ID for the VLAN currently displayed.
Range: 1-2048
A user-specified symbolic name for this VLAN.
String length: 8 alphanumeric characters
Enables/disables the specified VLAN.
Configuring Virtual LANs
3-27