Configuring Traffic Classes - Alcatel OmniStack 8008 User Manual

Console Interface
Parameter
Bridge Settings
Traffic Class*
GMRP*
GVRP*
* Not implemented in the current firmware release.

Configuring Traffic Classes

IEEE 802.1p defines up to 8 separate traffic classes. This switch supports Quality of
Service (QoS) by using two priority queues, with Weighted Fair Queuing for each
port. You can use the 802.1P Configuration menu to configure the default priority for
each port, or to display the mapping for the traffic classes as described in the
following sections.
Use <TAB> or arrow keys to move. <Enter> to select.
2-40
Description
Multiple traffic classes are supported by this switch as indicated under Bridge
Capabilities. However, you can disable this function by setting this parameter
to False.
GARP Multicast Registration Protocol (GMRP) allows network devices to
register endstations with multicast groups.
The Internet Group Management Protocol (IGMP) is currently used by this
switch to provide automatic multicast filtering.
GARP VLAN Registration Protocol (GVRP) defines a way for switches to
exchange VLAN information in order to register necessary VLAN members on
ports across the network. This function should be enabled to permit VLANs
groups which extend beyond the local switch.
Alcatel OmniStack 8008
< 802.1P Configuration >
802.1P Port Priority Configuration
802.1P Port Traffic Class Information
<Ok>