Alcatel OmniStack 8008 User Manual page 44

Console Interface
You can use the Port Trunking Configuration screen to set up port trunks as shown
below. Remember that you must "Enable" a new configuration before it will take effect.
Trunk ID
--------- -------- ----------- ----------- ----------- -----------
--
--
--
Trunk ID : 1
[Show]
[Enable]
Type the Trunk ID which you want to show.
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
Trunk ID
Port
[Show]
[More]
[Enable] [Disable]
2-34
Alcatel OmniStack 8008
< Port Trunking Configuration >
Status
1
-------- Port : --
-------- Port : --
-------- Port : --
[More]
[Disable]
Description
Configure up to four trunks per switch (ID of 1~4).
Select from 2~4 ports per trunk.
Displays trunk settings, where the first trunk listed is specified by "Sorted by
Trunk ID."
Scrolls through the list of configured trunks.
Enables/disables the selected trunk.
Member List
2
Port : -- Port : --
Port : -- Port : --
Port : -- Port : --
Trunk ID : 1
[Add] [Delete]
<OK>
3 4
Port : --
Port : --
Port : --
Member Port : 1
| READ/WRITE