System Information - Alcatel OmniStack 8008 User Manual

System Information

Use the System Information screen to display descriptive information about the
switch, or for quick system identification as shown in the following figure and table.
Parameter
System Name
1
IP Address 2
Object ID
Location
1
Contact 1
System Up Time
Maximum string length is 99, but the screen only displays 45 characters. You can use the arrow keys to
1
browse the whole string.
2 The default value is 192.168.10.1
Description
Name assigned to the switch system.
IP address of the switch you are managing. The switch's management
supports SNMP over UDP/IP transport protocol. In this environment, all
systems on the Internet, such as network interconnection devices and any PC
accessing the switch must have an IP address. Valid IP addresses consist of
four decimal numbers, of 0 to 255, separated by periods. Anything outside of
this format will not be accepted by the configuration program.
MIB II object identifier for switch's network management subsystem.
Specifies the area or location where the system resides.
Contact person for the system.
Length of time the current management software has been running.
System Information
3-7