Configuring Bridge Mib Extensions; Bridge Capability - Alcatel OmniStack 8008 User Manual

Configuring Bridge MIB Extensions

The Bridge MIB includes extensions for managed devices that support Traffic
Classes, Multicast Filtering and Virtual LANs. To configure these extensions, use the
Extended Bridge Configuration screen as shown below:

Bridge Capability

Parameter
Extended Multicast
Filtering Services
Traffic Classes
Static Entry Individual
Port
VLAN Learning
Configurable
PVID Tagging
Local VLAN Capable
Description
Indicates that the switch does not support the filtering of individual multicast
addresses based on GMRP (GARP Multicast Registration Protocol). Note
that this function is not implemented in the current firmware release.
Indicates that the switch provides mapping of user priorities to multiple traffic
classes. (Refer to the Priority menu on page 3-23.)
Indicates that the switch allows the static filtering of unicast and multicast
addresses. (Refer to the Address Table Configuration on page 3-14.)
This switch uses Independent VLAN Learning (IVL), whereby each port
maintains its own VLAN filtering database.
Indicates that the switch allows you to override the default PVID setting (Port
VLAN ID used in frame tags) and its egress status (VLAN-Tagged or
Untagged) on each port. (Refer to VLAN Port Configuration on page 3-30.)
This switch does not support multiple local bridges (that is, multiple Spanning
Trees).
Configuring Bridge MIB Extensions
3-21