Port Priority Configuration - Alcatel OmniStack 8008 User Manual

Port Priority Configuration

The default priority for all ingress ports is zero. Therefore, any inbound frames that
do not have priority tags will be placed in the low priority output queue. Default
priority is only used to determine the output queue for the current port; no priority tag
is actually added to the frame. You can use the 802.1P Port Priority Configuration
menu to adjust default priority for any port as shown below:
<APPLY>
The default ingress user priority of port 1.
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
Port
Default Ingress User
Priority
Number of Egress
Traffic Classes
Alcatel OmniStack 8008
< 802.1P Port Priority Configuration >
Port Default Ingress
User Priority
-----------------------------------------------
1 0
2 0
3 0
4 0
5 0
6 0
7 0
8 0
Description
Numeric identifier for switch port.
Default priority can be set to any value from 0~7, where 0~3 specifies the low
priority queue and 4~7 specifies the high priority queue.
Indicates that this switch supports two priority output queues.
Number of Egress
Traffic Class
<OK>
Configuring the Switch
2
2
2
2
2
2
2
2
<CANCEL>
| READ/WRITE
2-41