ELECTRICAL SYSTEM
Changing the headlight bulb
13.8
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
–
Position the headlight mask and fix it with the rubber band
Info
Make sure that the holding lugs engage in the fender.
–
Position the brake line and wiring harness
B01041-11
Subsequent work
–
Check the headlight setting. (
Preliminary work
–
Remove the headlight mask with the headlight. (
Main work
–
Turn rubber cap
the way and remove it.
–
Pull bulb socket
B01113-10
–
Press headlight bulb
pull it out.
–
Insert the new headlight bulb.
Headlight (S2/socket BA20d) (
–
Insert the rubber cap with the bulb socket into the reflector and turn it clockwise
all the way.
Info
Ensure that O-ring
100862-10
–
Insert the bulb socket of the parking light into the reflector.
Follow-up work
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (
.
4
p. 78)
together with the underlying bulb socket counterclockwise all
1
of the parking light out of the reflector.
2
lightly into the bulb socket, turn it counterclockwise, and
3
p. 98)
is seated properly.
4
p. 78)
.
3
p. 76)
p. 76)
77