Locking The Seat; Removing The Air Filter Housing; Installing The Air Filter Housing; Removing The Air Filter - KTM Freeride 350 Owner's Manual

Table of Contents

Advertisement

SERVICE WORK ON THE CHASSIS

Locking the seat

10.19

Removing the air filter housing

10.20
Note
Engine failure Unfiltered intake air has a negative effect on the service life of the engine.
Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.

Installing the air filter housing

10.21

Removing the air filter

x
10.22
Note
Engine failure Unfiltered intake air has a negative effect on the service life of the engine.
Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazard Hazardous substances cause environmental damage.
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Fold down the seat and push it down.
The seat engages with an audible click.
Finally, check that the seat is correctly locked.
B01022-10
x
Preliminary work
Fold the seat up. (
Main work
Pull off air filter housing
B01060-10
x
Main work
Position pre-filter
Note
Engine failure If the pre-filter is incorrectly mounted or not mounted at all, the air-
fuel mixture will be different. This has a negative effect on the service life of the
engine.
Make sure the pre-filter is seated correctly.
Attach air filter housing
B01061-10
Info
If the air filter housing is not mounted correctly, dust and dirt may enter the
engine and cause damage.
Subsequent work
Lock the seat. (
Preliminary work
Fold the seat up. (
p. 44)
and pre-filter
toward the top.
1
2
on the air filter housing.
1
to the inlet sleeve together with the mounted pre-filter.
2
p. 45)
p. 44)
45

Advertisement

Table of Contents
loading

Table of Contents