KTM Freeride 350 Owner's Manual page 90

SERVICE WORK ON THE ENGINE
–
Remove the oil filler plug
engine oil.
Engine oil (SAE 10W/50) (
Engine oil (SAE 10W/60) (00062010035) (
Info
For optimal performance of the engine oil, do not mix different types of
engine oil.
If appropriate, change the engine oil.
B01119-10
–
Install and tighten the oil filler plug with the O-ring.
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may
result in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
–
Start the engine and check that it is oil-tight.
with the O-ring from the clutch cover and fill up with
1
p. 103)
p. 103)
88