Idle Speed Adjusting Screw; Shift Lever; Foot Brake Lever; Side Stand - KTM Freeride 350 Owner's Manual

CONTROLS

Idle speed adjusting screw

5.30

Shift lever

5.31

Foot brake lever

5.32

Side stand

5.33
Idle speed adjusting screw
The idle speed adjusting screw has two functions.
Turning it controls the idle speed.
Pulling it out all the way raises the idle speed during a cold start.
Possible states
RPM increase activated – Idle speed adjusting screw is pulled out all the way.
•
RPM increase deactivated – Idle speed adjusting screw is pushed in all the way.
•
401342-10
Shift lever is mounted on the left side of the engine.
1
B01023-11
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
B01023-10
Foot brake lever
The foot brake lever is used to activate the rear brake.
B01024-10
The side stand
B01025-10
is located on the throttle valve body at the top left.
1
is located in front of the right footrest.
1
is on the left side of the vehicle.
1
20