SERVICE WORK ON THE CHASSIS
Raising the motorcycle with the lift stand
10.1
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
Removing the motorcycle from the lift stand
10.2
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
Bleeding the fork legs
10.3
Cleaning the dust boots of the fork legs
10.4
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (54829055000)
The wheels must no longer touch the ground.
–
Secure the motorcycle against falling over.
B01029-10
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
the motorcycle on it.
Info
When you are riding, the side stand must be folded up and secured with the
rubber band.
B01025-10
Preliminary work
–
Raise the motorcycle with the lift stand. (
Main work
–
Remove bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Mount and tighten bleeder screws.
B01037-10
Follow-up work
–
Remove the motorcycle from the lift stand. (
Preliminary work
–
Raise the motorcycle with the lift stand. (
to the ground with your foot and lean
1
p. 37)
briefly.
1
p. 37)
p. 37)
37