Table of Contents
Advertisement
SERVICE WORK ON THE CHASSIS
Removing the front fender
10.16
Installing the front fender
10.17
Folding the seat up
10.18
Info
The heim joint for the shock absorber at the swing arm is Teflon coated. It
must not be greased with grease or with other lubricants. Lubricants dis-
solve the Teflon coating, thereby drastically reducing the service life.
–
Tighten screw
Guideline
Screw, upper subframe
Subsequent work
–
Lock the seat. (
–
Remove the motorcycle from the lift stand. (
–
Remove screws
–
Ensure that the spacers remain in place.
B01030-10
–
Ensure that the spacers are mounted in the fender.
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
Info
Make sure the holding lugs engage in the headlight mask.
B01030-10
–
Press release lever
–
Lift the seat and fold it up.
B01021-10
.
4
M10
p. 45)
. Remove the front fender.
1
M6
.
1
45 Nm
(33.2 lbf ft)
p. 37)
.
1
10 Nm (7.4 lbf ft)
44
Advertisement
Table of Contents
