KTM Freeride 350 Owner's Manual page 77

ELECTRICAL SYSTEM
Main work
–
Take off EFI control unit
–
Open fuse box cover
B01111-10
–
Remove the defective fuse.
Guideline
Fuse 1 - 10 A - EFI control unit
Fuse 2 - 10 A - fuel pump
Fuse 3 - 10 A - high beam, low beam, parking light, tail light, license plate lamp
Fuse 4 - 10 A - horn, brake light, turn signal, radiator fan, speedometer
Fuse 5 - not used
Fuses res - 10 A - spare fuses
B01112-10
Info
A defective fuse is indicated by a burned-out fuse wire
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are
used.
–
Use only fuses with the prescribed amperage. Never by-pass or repair
fuses.
–
Use spare fuses with the correct rating only.
Fuse (58011109110) (
Tip
Replace the spare fuse in the fuse box so that it is available if needed.
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover.
–
Position the EFI control unit.
Follow-up work
–
Lock the seat. (
.
1
.
2
p. 98)
p. 45)
75
.
A