SERVICE WORK ON THE CHASSIS
–
Position the upper triple clamp with the steering.
–
Mount screw
–
Position the clutch line and wiring harness.
B01056-11
–
Position the fork legs.
Info
The topmost milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
B01059-10
–
Tighten screws
Guideline
Screw, bottom triple clamp
B01054-12
–
Tighten screw
Guideline
Screw, top steering head
B01106-10
–
Mount and tighten screw
Guideline
Screw, top steering stem
B01106-11
–
Tighten screws
Guideline
Screw, top triple clamp
–
Secure the wiring harness with the cable holder.
B01054-13
but do not tighten yet.
4
toward the front.
5
.
6
.
4
.
7
M8
.
8
M8
18 Nm
(13.3 lbf ft)
M20x1.5
12 Nm (8.9 lbf ft)
17 Nm
Loctite
®
(12.5 lbf ft)
M8
22 Nm
(16.2 lbf ft)
41
243™