Panel Unit/Lcd Unit (Sx210 Series) - Epson Stylus NX510 Service Manual

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510
Disassembling the Main Board Unit
For the disassembling/reassembling procedures of the Main Board Unit of SX210
series, see Disassembling the Main Board Unit (p147)
SX410 series.
DISASSEMBLY/ASSEMBLY
because they are the same as
Differences in Disassembling/Reassembling SX210 series

4.8.2 Panel Unit/LCD Unit (SX210 series)

See the following because the disassembling/reassembling
C H E C K
procedures of the Panel Unit/LCD Unit for NX510/SX410 series
P O I N T
differ from those of SX210 series.
NX510 series:
" 4.4.2 Panel Unit/LCD Unit " (p108)
SX410 series:
" 4.7.2 Panel Unit/LCD Unit (SX410 series) " (p148)
Parts/Components need to be removed in advance: None
Removal procedure
1. Open the Scanner Unit.
Do not pull away the Panel Unit too far, because the Panel FFC
C A U T I O N
and the grounding wire are connected to the backside of the Panel
Unit.
2. Lifting the front of the Panel Unit, and release the tabs of it.
3. Slide the Panel Unit in the direction of the arrow, and release the hooks of it
from the Upper Housing.
Upper Housing
Backside
Figure 4-146. Removing the Panel Unit (1)
Revision A
Panel Unit
Hook Tab
Confidential
155