Differences In Disassembling/Reassembling Sx210 Series; Main Board Unit (Sx210 Series) - Epson Stylus NX510 Service Manual

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510
4.8 Differences in Disassembling/Reassembling
SX210 series

4.8.1 Main Board Unit (SX210 series)

See the following because the disassembling/reassembling
C H E C K
procedures of the Main Board Unit for NX510/SX410 series differ
P O I N T
from those of SX210 series.
NX510 series: " 4.4.1 Main Board Unit " (p105)
SX410 series: " 4.7.1 Main Board Unit (SX410 series) " (p146)
Parts/Components need to be removed in advance
Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot
Cover/Lower Housing
Removal procedure
1. Disconnect the following connectors (x4) and FFCs (x3) from the Main
Board.
Cable
CN No.
CN1 Power Supply Unit cable
CN5 Head FFC
CN6 Head FFC
CN8 CR Motor cable
Main Board Unit
CN1
Figure 4-143. Removing the Main Board Unit (1)
DISASSEMBLY/ASSEMBLY
Cable
CN No.
CN9 PF Motor cable
CN11 PF Encoder FFC
CN24 PE Sensor cable
CN11
CN5
CN24
CN9
CN6
CN8

Differences in Disassembling/Reassembling SX210 series

2. Remove the screw (x1) that secures the Main Board Unit, and remove the
Main Board Unit.
Main Board Unit
Figure 4-144. Removing the Main Board Unit (2)
When installing the Main Board Unit, insert its hooks (x2)
into the cutouts (x2) of the Left Frame.
Main Board Unit
Figure 4-145. Installing the Main Board Unit
Tighten the screws in the order given in
Revision A
C.B.S. 3x6, F/Zn-3C (4±0.5kgfcm)
Left Frame
Cutout
Hook
Figure 4-126.
154
Confidential