Epson Stylus NX510 Service Manual page 179

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510
PF Roller Grounding Spring
PF Roller
Figure 6-5. Lubrication on PF Roller Grounding Spring
MAINTENANCE
<Lubrication Point>
Contact area with the PF Roller.
<Lubrication Type>
G-71
<Lubrication Amount>
φ
1 mm x 4 mm
<Remarks>
Use an injector to apply G-71.
Lubrication must be performed
only after installing the PF
Roller Grounding Spring.
Overview
Cam A
Cam B
Cam A
Cam B
Figure 6-6. Lubrication on LD Roller Shaft
Revision A
<Lubrication Point>
Cam A and Cam B of the LD
Roller shaft
<Lubrication Type>
G-71
<Lubrication Amount>
φ
1 mm x around each cam
<Remarks>
Use an injector to apply G-71.
Rub off excess G-71 with a
cotton bud if necessary.
179
Confidential