Epson Stylus NX510 Service Manual page 109

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510
Be sure to disconnect the Panel FFC from the connector on the
C H E C K
Panel Board.
P O I N T
5. Disconnect the Panel FFC from the connector (CN1) of the Panel Board, and
remove the Panel Unit together with the LCD Unit.
LCD Unit
Panel Unit
Figure 4-26. Removing the Panel Unit and LCD Unit (2)
6. Disconnect the LCD FFC from the connector (CN2) of the Panel Unit.
7. Release the dowels (x2) that secure the LCD Unit, and separate the LCD Unit
from the Panel Unit.
LCD FFC
LCD Unit
Figure 4-27. Removing the Panel Unit and LCD Unit (3)
DISASSEMBLY/ASSEMBLY
CN1
Panel Unit
CN2
Dowel
Removing the Circuit Boards
8. Remove the screws (x3) that secure the Panel Board and Panel Board Frame,
and remove the Panel Board together with the Panel Board Frame.
Panel Board Frame
Panel Board
Figure 4-28. Removing the Panel Board
Revision A
C.B.P. 3x8, F/Zn-3C (3±1kgfcm)
Positioning Hole/Pin
109
Confidential