Epson Stylus NX510 Service Manual page 60

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510
Error Name
NX510 series
Paper out.
Paper out error
Load paper and press the Start button.
Multi-page feed error.
Double feed error Remove and reload the paper, then press the Start
button.
Memory card error Cannot recognize the memory card or disk.
Index sheet error 1 There is no index sheet or it is not positioned
(No index sheet) correctly. Check it and try again.
Index sheet error 2 Photos are not selected or the ovals are marked
(Image marking error) incorrectly. Please correct and try again.
Index sheet error 3 The paper type is not selected or the ovals are
(Paper marking error) marked incorrectly. Please correct and try again.
Index sheet error 4 The contents of the memory card have changed.
(Incorrect card) Print a new index sheet and try again.
DSC Direct error *2 Cannot recognize the device.
TROUBLESHOOTING
Table 3-5. Error Indications and Fault Occurrence Causes
LCD Message
SX410 series SX210 series
Paper out Load paper.
Multi-page feed error.
Memory card not
recognized.
No Index Sheet on
scanner.
No photos selected.
Select paper type.
Memory card does not
match Index Sheet.
N/A
Error Indications and Fault Occurrence Causes
STM3 Message
Reload the paper, then press the Start button on
the printer or click the [Continue] button if it
appears on the screen. To cancel the print job,
click the [Cancel] button.
A page has not been printed, multiple pages
have been fed into the printer at once, or the
wrong paper size has been fed into the printer.
Remove and reload the paper. Press the Start
button if necessary.
--
--
--
--
--
--
Revision A
Error Cause Reference
Table 3-10.
Failure to load paper to print.
(p72)
Table 3-18.
Double feed during double
(p76)
sided printing.
That memory card is not
available with this unit. Or no
Table 3-13.
image can be found in that card
(p74)
when memory card print is
started.
The direction of order sheet is
Table 3-14.
opposite.
(p75)
No index sheet is recognized
correctly.
When there is a mismatch in the
Table 3-15.
content of the order sheet
(p75)
(When it is not marked though
the selection is necessary.)
Table 3-16.
The different card or updated
(p75)
card is found for that sheet.
A device not supported is
connected to the port for the
Table 3-12.
connection of external memory
(p74)
devices.
The DSC demands the current
larger than mechanical limit.
Confidential
60