Epson Stylus TX410 Start Here

Start Here
Please read these instructions before using the printer.
1
Unpack
If anything is missing, contact Epson as described on the back.
Caution:
Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on the printer
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Press the Encender/Ligar (On) button.
Note:
You can raise the LCD display screen for better viewing, if necessary.
*411662500*
*411662500*
Encender
Ligar
3
Select your language
Press or to select your language, then press OK.
Language
4

Install ink cartridges

Caution:
Keep ink cartridges out of the reach of children and do not drink the ink.
Note:
The ink cartridges that come with your printer have a lower yield due to the ink
system charging process. This process is carried out the first time you turn on your
printer and guarantees better performance.
Don't load paper before installing ink cartridges.
1
Lift up the scanner, then open the cartridge cover.
2
Shake the ink cartridges gently 4 or 5 times, then unpack them.
3
Remove only the yellow tape from each cartridge.
Caution:
Do not remove any other seals or the cartridge may leak.
4
Insert the cartridges in the holder for each color.