Epson Stylus NX510 Service Manual page 101

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510
4. Peel off the double-sided tape (x1) that secures the Scanner Carriage FFC to
the Main Board Frame.
(For SX410 series, remove the Scanner Carriage FFC with the core.)
5. Peel off the double-sided tape (x1) that secures the Scanner Carriage FFC to
the Upper Housing.
Upper Housing's inside
Scanner Carriage FFC
Double-sided tape
Main Board Frame
Figure 4-8. Removing the Scanner Unit (2)
DISASSEMBLY/ASSEMBLY
SX410 series
Ferrite Core
Double-sided tape
Scanner Carriage FFC
Double-sided tape
Sharp Edge
Removing the Housing
6. Remove the screws (x2) that secure the Scanner Unit.
7. Open the Scanner Unit.
8. Pull out the Scanner Unit in the direction of the arrow, taking care not to let
the Scanner Motor Cable and Scanner Carriage FFC get caught by the Upper
Housing.
Top
Scanner Unit
Figure 4-9. Removing the Scanner Unit (3)
Revision A
C.B.P. 3x10, F/Zb-3C (Black) (6±1kgfcm)
C.B.P. 3x10, F/Zn-3C (Silver) (6±1kgfcm)
Confidential
101