Epson Stylus NX510 Service Manual page 110

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510
9. Remove each switch button from the Panel Cover.
No. Button
1 Power SW button
2 Copy mode SW button
3 Memory Card mode SW button
4 Photo mode SW button
5 Scan mode SW button
6 - SW button
7 Up SW button
8 + SW button
9 Left SW button
1
2 4
3 5
Figure 4-29. Removing the Switch button
DISASSEMBLY/ASSEMBLY
No. Button
10 OK SW button
11 Right SW button
12 Menu SW button
13 Down SW button
14 Back SW button
15 Setup SW button
16 Display SW button
17 Stop SW button
18 Start SW button
6 9 12
15 17
7 10 13
16 18
8 11 14
Removing the Circuit Boards
When installing the Panel Board, align the positioning holes
of the Panel Board with their positioning pins of the Panel
Housing as shown in Figure 4-28.
When installing the Panel Unit, attach it without any gap with
the Upper Housing.
Attach it without
any gap.
Figure 4-30. Installing the Panel Unit
Revision A
Panel Unit
110
Confidential