Epson Stylus NX510 Service Manual page 140

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510
2. Remove the Waste Ink Cover and the Diffusion Sheet.
Diffusion Sheet
Figure 4-110. Removing the Waste Ink Cover and Diffusion Sheet
When installing the Waste Ink Cover, be sure to align the
dowel (x1) of the Base Frame with the positioning hole (x1) of
the Waste Ink Cover as shown in
confirm the cover is properly secured on the Diffusion Sheet
without any gap.
When installing the Diffusion Sheet, Waste Ink Cover, and the
Waste Ink Pads on section B, attach them in the order given in
the figure below.
NX510 series: see
•
SX410 series: see
•
SX210 series: see
•
NX510 series
3
Figure 4-111. Installing the Waste Ink Pads (NX510 series)
DISASSEMBLY/ASSEMBLY
Waste Ink Cover
Dowel and Positioning Hole
Figure 4-110. Make sure to
Figure 4-111.
Figure 4-112.
Figure 4-113.
1
2
4 5
Disassembling the Printer Mechanism
SX410 series
3
Figure 4-112. Installing the Waste Ink Pads (SX410 series)
SX210 series
3
Figure 4-113. Installing the Waste Ink Pads (SX210 series)
Whenever the Waste Ink Pads is removed/replaced, the required
A D J U S T M E N T
R E Q U I R E D
adjustments must be carried out.
Chapter 5 " ADJUSTMENT" (p.161)
•
Revision A
1
2
4
1
2
4
Confidential
140