Front Paper Guide - Epson Stylus NX510 Service Manual

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510

4.5.18 Front Paper Guide

Parts/Components need to be removed in advance
Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot
Cover/Lower Housing/Main Board Unit/Left Frame/Front Frame/Right Frame/CR
Motor/CR Scale/Hopper/Main Frame Assy/ASF Unit/Ink System Unit/Star Wheel
Holder Assy/EJ Roller
Removal procedure
When removing the Front Paper Guide, be cautious not to damage
C A U T I O N
the ribs on the upper surface of the Front Paper Guide.
Figure 4-102. Ribs of the Front Paper Guide
1. Remove the screws (x2) that secure the Front Paper Guide.
Front Paper Guide
1
Figure 4-103. Removing the Front Paper Guide (1)
DISASSEMBLY/ASSEMBLY
Ribs
2
C.B.P. 3x10, F/Zn-3C (6±1kgfcm)
Disassembling the Printer Mechanism
2. Release the hook (x1) of the Front Paper Guide, and remove the Front Paper
Guide.
Figure 4-104. Removing the Front Paper Guide (2)
When installing the Front Paper Guide, be cautious not to
damage the PF Roller.
NX510 series only:
Install the Front Paper Guide so that the Grounding Spring
comes outside of the hook of the Front Paper Guide.
Confirm that the leg of the Pad Front Paper Guide is not
caught between the Front Paper Guide and Base Frame.
Leg of Pad Front Paper Guide
Correct Position
Figure 4-105. Installing the Front Paper Guide
Tighten the screws in the order given in
Revision A
Front Paper Guide
Hook
Grounding Spring
Hook
Incorrect Position
Figure 4-103.
137
Confidential