Front Frame/Right Frame - Epson Stylus NX510 Service Manual

Epson Stylus NX510/515/SX510W/515W/TX550W/NX415/SX410/415/TX410/419/NX215/SX210/215/TX210/213/219/ME OFFICE 510

4.5.6 Front Frame/Right Frame

Parts/Components need to be removed in advance
Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot
Cover/Lower Housing/Main Board Unit/Left Frame
Removal procedure
In this section, some disassembling procedures differ between
C H E C K
models. Skip the model-specified steps if not applied to your
P O I N T
model.
1. Remove the acetate tape and the ferrite core shown below from the Front
Frame.
Item
Ferrite core
Acetate tape
2. Release the Head FFC from the hooks (x3) of the Front Frame.
3. Remove the Grounding Spring from the Front Frame.
Front Frame
acetate tape
Ferrite core
Head FFC
Figure 4-53. Removing the Front Frame/Right Frame (1)
DISASSEMBLY/ASSEMBLY
NX510 series SX410/SX210 series
1 piece ---
1 piece 2 pieces
SX410/SX210 series
acetate tape
Grounding Spring
Disassembling the Printer Mechanism
4. For NX510/SX410 series: Peel off the Porous Pad Frame Right from the
Right Frame and the Base Frame.
Right Frame
Base Frame
Figure 4-54. Removing the Front Frame/Right Frame (2)
5. Remove the screw (x1) that secures the Front Frame and the Right Frame
together.
6. Release the dowel (x1) and the hook (x1) that secure the Right Frame, and
remove the Right Frame.
Hook
Figure 4-55. Removing the Front Frame/Right Frame (3)
Hook
Porous Pad Frame Right
Dowel and hole
Right Frame
dowel
C.B.P. 3x8, F/Zn-3C (6±1kgfcm)
Revision A
Double-sided tape
120
Confidential