Front Paper Guide - Epson Stylus OFFICE B30 Service Manual

EPSON Stylus C110/C120/D120/WorkForce 30/EPSON Stylus OFFICE B30/T30/T33/ME OFFICE 70

4.5.17 Front Paper Guide

Part/Unit that should be removed before removing Front Paper Guide
Upper Housing/Lower Housing/Main Board Unit/Left Frame/Panel Unit/Front
Frame/Right Frame/CR Motor/CR Scale/Hopper/Main Frame Ashy./ASF Unit/Ink
System Unit/Star Wheel Holder Assy./EJ Roller
Removal Procedure
When removing the Front Paper Guide, Be cautious not to damage
C A U T I O N
the rib on the upper surface of the Front Paper Guide.
Figure 4-81. Rib of the Front Paper Guide
1. Remove the screws (x2) that secure the Front Paper Guide.
Front Paper Guide
1
Figure 4-82. Removing Front Paper Guide (1)
DISASSEMBLY/ASSEMBLY
Rib
2
C.B.P. 3x10, F/Zn-3C (6±1kgfcm)
Disassembling Printer Mechanism
2. Release the hook (x1) of the Front Paper Guide, and remove it.
Figure 4-83. Removing Front Paper Guide (2)
When installing the Front Paper Guide, be cautious not to
damage the PF Roller.
Make sure that the tip of the PGF Pad is put in the correct
position as shown in the figure below. It should not get caught
between the Front Paper Guide and the Base Frame.
Tip of the PGF Pad
Correct Position
Figure 4-84. Installing Front Paper Guide
Tighten the screws in the order given in
After removing/replacing the Front Paper Guide, be sure to
A D J U S T M E N T
R E Q U I R E D perform the specified adjustment. See
ADJUSTMENT" (p.98)
After replacing the Front Paper Guide, be sure to perform the
required lubrication. See
(p.107)
Revision C
Front Paper Guide
Hook
Incorrect Position
Figure 4-82.
Chapter 5 "
Chapter 6 " MAINTENANCE"
Confidential
95