Front Frame/Right Frame - Epson Stylus CX7300 Service Manual

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
When installing the Left Frame, lead the PF Encoder FFC
through the hole of the Left Frame.
PF Encoder FFC
Figure 4-47. Routing the PF Encoder FFC
When installing the Left Frame, match the guide pins (x2) of
the Base Frame with their positioning holes (x2) of the Left
Frame as shown in
Tighten the screws in the order given in
DISASSEMBLY/ASSEMBLY
Left Frame
Hole
Figure 4-46.
Figure 4-46.
Disassembling the Printer Mechanism

4.5.6 Front Frame/Right Frame

Parts/Components need to be removed in advance
Document Cover/ASF Cover/Scanner Unit/Panel Unit/Upper Housing/Card Slot
Cover/Lower Housing/Main Board Unit/Left Frame
Removal procedure
1. Remove the acetate tape (x1) that secures the Head FFC to the Front Frame.
2. Release the Head FFC from the hooks (x3) of the Front Frame.
3. Remove the Grounding Spring from the Front Frame.
Head FFC
Figure 4-48. Removing the Front Frame/Right Frame (1)
Front Frame
acetate tape
Hook
Grounding Spring
Confidential
114