Using Media Flanges For Paper Tubes (Cores) With An Internal Diameter Of 2 Inches - Roland TrueVIS VG-640 User Manual

Other Useful Functions
C
Press [ ], then [ ] to display the screen shown below.
SUB MENU
TEST PRINT POS
D
Press [ ] to display the screen shown below.
TEST PRINT POS
SCAN
E
Press [ ] or [ ] to select "FEED."
TEST PRINT POS
SCAN
F
Press [ENTER] to confirm your entry.
G
Press [MENU] to go back to the original screen.
Description
When performing printing tests successively, you can select "SCAN" (vertical printing) or "FEED" (horizontal
4
printing) as the print position for the 2nd and later tests in comparison to the 1st test.
If you are using the optional media take-up system, test prints will be printed with the "SCAN" orientation
regardless of this setting.
Default Setting
[TEST PRINT POS]: SCAN

Using Media Flanges for Paper Tubes (Cores) with an Internal Diameter of 2 Inches

Note: The media flanges for paper tubes (cores) with an internal diameter of 2 inches are optional items. For
information about purchasing them, contact your authorized Roland DG Corp. dealer.
End cap
156
SCAN
FEED
Pull out the pin.
If it is difficult to pull out, use a pair
of pliers or a similar tool.
Media flange for 2-inch media
Insert the pin.
Line up the ridges
and grooves.