Basic Printing Method; Printing Flow - Roland TrueVIS VG-640 User Manual

Basic Printing Method

Printing Flow

Step 1 : Loading Roll Media (Setup of Media) (P. 29)
First, load the media on the printer. Load the media correctly according to the explanations.
2
Step 2 : Initial Adjustment (Correcting for Misalignment in Bidi-
rectional Printing) (P. 37)
Perform the printing correction. Be sure to perform this step the first time you use the machine.
Step 3 : Batch Settings (P. 39)
You can set the minimum of items necessary for output as a batch.
Step 4 : Setting the Base Point (P. 53)
Set the base point in order to determine the output area.
Step 5 : Printing Tests and Normal Cleaning (P. 54)
Before you carry out actual printing, ensure no dot drop-out occurs. If dot drop-out occurs, perform
cleaning.
Step 6 : Starting Output (P. 57)
Send data from the computer and output it from the printer.
The above procedure is the basic flow of printing operations. The first time you print data, follow this procedure.
Once you are used to the machine, configure advanced settings to obtain printing that matches your purpose.
If the machine is used for a long time, a variety of maintenance operations may also become necessary.
28