Roland TrueVIS VG-640 User Manual page 43

D
Move the height-adjustment lever to adjust the print head height.
When you change the position of the height-adjustment lever, the display screen will change.
When the lever is moved to the "High" direction, the buzzer sounds twice. When it is moved to the
"Low" direction, the buzzer sounds once.
M E M O
Normally move the height-adjustment lever to "Low." For media that is wrinkled or comes loose
from the platen, move the height-adjustment lever to "High."
E
Close the front cover.
4.
Perform the position correction of the feed direction (reduce horizontal stripes). (Separate setting "
M E M O
Feed direction means the feed direction of the media. Perform the correction adjusting to the media
in advance because horizontal stripes are more likely to occur during printing when the movement
distance of the media changes subtly depending on the media's type or thickness.
A
Press [ ] to select "SET."
CALIBRATION
[SET] NEXT
B
Press [ENTER] to confirm your entry.
The test pattern of feed correction is printed.
You can select "NEXT" and press [ENTER] to proceed to the next menu.
C
Press [ENTER].
INPUT
ADJ. VALUES
Height-adjustment lever
Move firmly, until it stops.
HEAD HEIGHT
LOW
HEAD HEIGHT
LOW
Basic Printing Method
HIGH
LOW
)
P.126
41
2