Preventing Pulling Of The Media With Undue Force - Roland TrueVIS VG-640 User Manual

Basic Settings for Cutting

Preventing Pulling of the Media with Undue Force

Procedure
A
Press [MENU].
B
Press [ ] to display the screen shown below.
2
MENU
CUTTING MENU
C
Press [ ] once, and then press [ ] several times to display the screen shown below.
CUTTING MENU
PREFEED
D
Press [ ] to display the screen shown below.
PREFEED
DISABLE DISABLE
E
Press [ ] or [ ] to select "ENABLE."
PREFEED
DISABLE ENABLE
F
Press [ENTER] to confirm your entry.
G
Press [MENU] to go back to the original screen.
Description
This feeds out media according to the size of the data sent from the computer before performing cutting. This
makes it unnecessary to turn the media flanges by hand to feed out media every time you perform cutting.
Note, however, that this feeds out media even when you are performing printing only, so set it to "DISABLE"
when not needed.
Default Setting
[PREFEED]: DISABLE
60