Using Sticky Media - Roland TrueVIS VG-640 User Manual

Configuring Settings to Match the Properties of the Media
Default Setting
[PERIODIC CL.]: NONE

Using Sticky Media

Procedure
A
Press [MENU].
B
Press [ ] several times to display the screen shown below.
MENU
SUB MENU
C
Press [ ] once, and then press [ ] several times to display the screen shown below.
SUB MENU
MEDIA RELEASE
4
D
Press [ ] to display the screen shown below.
MEDIA RELEASE
DISABLE DISABLE
E
Press [ ] or [ ] to select "ENABLE."
MEDIA RELEASE
DISABLE ENABLE
F
Press [ENTER] to confirm your entry.
G
Press [MENU] to go back to the original screen.
Description
Some types of media may tend to stick to the platen. Starting printing with the media sticking to the platen
may make normal media feed impossible and cause the media to jam. When using such media, set the [MEDIA
RELEASE] menu item to "ENABLE." This peels off the media before starting printing if it is stuck to the platen.
Note, however, that media feed may be unstable when printing is performed after executing this operation.
Leave this menu item set to "DISABLE" unless you specifically need to change it.
Default Setting
[MEDIA RELEASE]: DISABLE
134