Enabling The Web Management Interface - Nortel COMMISSIONING 8600 Commissioning

4
5
Variable definitions
Use the data in the following table to use the flags command.
Variable
access-service
true|false

Enabling the Web management interface

Start the Web management interface to provide management access to
the switch using a Web browser. For details about configuring the Web
management interface, see Nortel Ethernet Routing Switch User Interface
Fundamentals, NN46205-308.
Procedure steps
Step
1
2
Variable definitions
Use the data in the following table to use the config web-server
command.
Copyright © 2008 Nortel Networks
.
Enable or disable the access service by using the following
command:
flags <access-service> <true|false>
Save the boot configuration.
Action
Enable the Web server by using the following command:
config web-server enable
Configure the access password by using the following command:
config web-server password <ro> <username> <password>
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Enabling the Web management interface 109
--End--
Value
Specifies the type of remote access
service as one of the following:
•
ftpd
•
rlogind
•
telnetd
•
tftpd
•
sshd
True enables the service. False
disables the service.
--End--