Nortel COMMISSIONING 8600 Commissioning page 61

Ethernet routing switch
Table of Contents

Advertisement

Variable
location <location>
max-vlan-resource-reservation
<enable|disable>
mgmt-virtual-ip <ipaddr/mask>
mgmt-virtual-ipv6 <ipv6addr/pr
efix-len>
mroute-stream-limit
<enable|disable>
mtu <bytes>
multicast-resource-reservatio
n <value>
name <prompt>
portlock <on|off>
sendAuthenticationTrap
<true|false>
smlt-on-single-cp <enable|disa
ble> [timer <value> ]
topology <on|off>
udp-checksum <enable|disable>
Copyright © 2008 Nortel Networks
.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Configuring system identification 61
Value
Changes the system location.
Enables MAX-VLAN feature.
Configures mgmt virtual
IP.ipaddr/mask is the IP address
and network mask {a.b.c.d/x |
a.b.c.d/x.x.x.x | default}.
Configures mgmt virtual
IPV6.ipv6addr/prefix-len
is the IPV6 address. The string
length ranges from 0 to 46.
Global mroute stream limit
configuration.enable|disable
enables or disables mroute stream
limit.
Sets MTU (with CRC) to one of three
values: 1522, 1950 and 9600 bytes.
is the MTU value in the range of
1522 to 9600.
Reserves MGIDs for IPMC
use.value is the number of MGIDs
reserved for IPMC use in the range
from 64 to 4083.
Changes the system name. prompt
is the box or root level prompt . The
string length ranges from 0 to 255.
Turns portlock on/off.
Sets authentication trap to true or
false.
Enables SMLT on Single CP feature.
enable|disable Enables
or disable SMLT on single CP
feature.
[timer <value> ] is the timer
value for SMLT on single CP
feature timer in the range of 1 to
3.
Turns topology on/off.
Enables or disables UDP Checksum
calculation.

Advertisement

Table of Contents
loading

This manual is also suitable for:

8600

Table of Contents