Nortel COMMISSIONING 8600 Commissioning page 58

58 Initial steps using the CLI
Table 9
Job aid: Setup utility prompt descriptions (cont'd.)
Prompt
Do you want to enable
TELNET [n] (y/n)?
Do you want to enable TFTP
[n] (y/n)?
Do you want to enable WEB
server service [n] (y/n)?
IP Address for mgmt port in
first CPU Slot [192.168.168.16
8/255.255.2.55.0]:
IP Address for mgmt port in
second CPU Slot [192.168.168
.169/255.255.255.0]:
IP Address for mgmt-virtual-ip
[0.0.0.0/0.0.0.0]:
Copyright © 2008 Nortel Networks
.
Description and action
Description: Specifies if you want to access
the switch by Telnet.
Action: Enter y to enable Telnet. Accept the
default (n) to not enable Telnet.
Description: Specifies if you want to access
the switch by Trivial FTP (TFTP).
Action: Enter y to enable TFTP. Accept the
default (n) to not enable TFTP.
Description: Specifies if you want to enable
Web server service. Use the Web server
service to monitor statistics for the switch with
your Web browser.
Action: Enter y to enable Web server
service. Accept the default (n) to not enable
Web server service.
Description: Indicates the IP address for the
management port in the CPU slot you specify.
Action: Type the IP address of the
management port in the first CPU slot.
Description: Indicates the IP address for the
management port in the CPU slot you specify.
Action: Type the IP address of the
management port in the second CPU slot.
Description: Indicates the IP address for the
virtual management port.
Action: Type the IP address of the virtual
management port. Accept the default
(0.0.0.0/0.0.0.0) to not specify an IP address.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008