Nortel COMMISSIONING 8600 Commissioning page 65

Prerequisites
•
Procedure steps
Variable definitions
Use the data in the following table to use the config cli password
command.
Variable
access-level <access level>
<enable|disable>
aging <days>
default-lockout-time <secs>
info
Copyright © 2008 Nortel Networks
.
You must use an account with read/write/all privileges to change
passwords. For security, the switch saves passwords to a hidden file.
The optional parameter password is the password associated with the
user name or logon name.
Action
Change a password by using the following command:
config cli password
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Changing passwords 65
Value
Permits or blocks this access
level.
•
access level is an integer
from 2–8.
•
enable|disable enables or
disables the chosen level.
Configures the time limit for
passwords. daysis the age-out
time as an integer from 1–365.
Changes the default lockout time
after three invalid attempts. secs
is the lockout time in seconds
and is in the 60–6500 range. The
default is 60 seconds.
Shows the level parameter
settings and the next level
directories.