Nortel COMMISSIONING 8600 Commissioning page 90

90 Initial steps using the NNCLI
Variable
dst-end <Mm.n.d/hhmm|MMddh
hmm>
dst-name <dstname>
dst-offset <minutes>
dst-start <Mm.n.d/hhmm|MMd
dhhmm>
Copyright © 2008 Nortel Networks
.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Value
Configures the ending date of DST. You
can specify the time in one of two ways:
•
Mm.n.d/hhmm specifies an hour on
the nth occurrence of a weekday in a
month. For example, M10.5.0/0200
means the fifth occurrence of Sunday
in the tenth month (October) at 2:00
a.m.
•
MMddhhmm specifies a month, day,
hour, and minute. For example,
10310200 means October 31 at 2:00
a.m.
Configures an abbreviated name for the
local daylight saving time zone. dstname
is the name. For example, PDT is Pacific
Daylight Time.
To configure this option to the default
value, use the default operator with the
command.
Configures the daylight saving adjustment
in minutes.
The default is 60 minutes.
To configure this option to the default
value, use the default operator with the
command.
Configures the starting date of DST.
•
Mm.n.d/hhmm specifies an hour on
the nth occurrence of a weekday in a
month. For example, M10.5.0/0200
means the fifth occurrence of Sunday
in the tenth month (October) at 2:00
a.m.
•
MMddhhmm specifies a month, day,
hour, and minute. For example,
10310200 means October 31 at 2:00
a.m.