Nortel COMMISSIONING 8600 Commissioning page 88

88 Initial steps using the NNCLI
Variable
authentication-trap
bootstrap
community
contact <word>
force-iphdr-sender
force-trap-sender
group
host
location <word>
log
name <word>
notify-filter
sender-ip
user
view
Copyright © 2008 Nortel Networks
.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Value
Enables or disables generation of
authentication traps.
Sets SNMP initial user entry.
Sets community table.
Identifies the contact person who manages
the node. To include blank spaces in the
contact, use quotation marks (") around
the text. Use the no operator to remove
this configuration. To configure this option
to the default value, use the default
operator with the command. The default is
support@nortelnetworks.com.
Sets same SNMP and IP sender flag.
Sets SNMP trap sender IP.
Sets SNMP v3 group access table.
Specifies hosts to receive SNMP
notifications.
Identifies the physical location of the
node. To include blank spaces in the
location, use quotation marks (") around
the text. Use the no operator to remove
this configuration. To configure this option
to the default value, use the default
operator with the command. The default is
a Nortel address.
Specifies the SNMP log feature.
Configures the system or root level
prompt name for the switch. word is an
ASCII string from 1 to 255 characters (for
example, LabSC7 or Closet4).
Creates new entry for notify filter table.
Sets SNMP trap sender IP.
Creates or modifies SNMPv3 user.
Creates or modifies an SNMP access
view.