Nortel COMMISSIONING 8600 Commissioning page 80

80 Initial steps using the NNCLI
Table 11
Job aid: PPP file options (cont'd.)
Option
no_vjccomp
pap_file <file>
pap_max_authreq <value>
pap_passwd <password>
pap_restart <value>
pap_user_name <name>
passive_mode
proxy_arp
remote_auth_name <name>
require_chap
require_pap
Copyright © 2008 Nortel Networks
.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Description
Disables VJ connection ID
compression.
Obtains PAP secrets from the
specified file. You require this
option if either peer requires PAP
authentication. If your users must use
the same IP address, the PAP and
CHAP secret files must specify the
same IP address for all users and it
must match the peer-ip setting on the
modem port.
Configures the maximum number of
transmissions for PAP authentication
requests to the value you specify.
Configures the password for PAP
authentication with the peer to the
specified password.
Configures the timeout, in seconds,
for PAP negotiation to the value you
specify.
Configures the user name for PAP
authentication with the peer to the
specified name.
Configures passive mode. PPP waits
for the peer to connect after an initial
connection attempt.
Adds an entry to the Address
Resolution Protocol (ARP) table
with the IP address of the peer and the
Ethernet address of the local system.
Configures the remote name for
authentication to the specified name.
Requires CHAP authentication with
peer.
Requires PAP authentication with
peer.