Enabling Web Configuration; Configuring Workstations To Use The Instant Internet Unit As A Web Proxy Server; Figure 58 Web Server Configuration Dialog Box - Nortel BayStack Instant Internet 100-S Using Manual

Enabling Web configuration

If you want to configure Web cache settings or view and edit Instant Internet
system and log files, you must enable Web configuration.
To enable Web configuration:
1
In the Services dialog box
box.
2
Click Configure.
The WEB Server Configuration dialog box opens

Figure 58 WEB Server Configuration dialog box

3 Enter the Port number for the Web proxy server.
The default is 80.
4
Click OK.
Configuring workstations to use the Instant Internet unit
as a Web proxy server
If you chose to run the Web proxy transparently, you do not need to change the
browser configuration for each workstation. If you chose not to have the Instant
Internet unit run the Web proxy transparently, then follow the steps below to
configure your workstations for an HTTP proxy.
To configure Netscape Communicator for the PC:
1 Choose Edit > Preferences.
The Preferences dialog box opens.
Using the BayStack Instant Internet Management Software Version 7.11
Chapter 4 Proxy services
(Figure 56), select the WEB Configuration check
(Figure 58).
119