Web Management; Device Manager - Nortel COMMISSIONING 8600 Commissioning

The switch first checks for the file pcmboot.cfg, in Personal Computer
Memory Card International Association (PCMCIA). If not found, the switch
checks for the file boot.cfg in flash.
ATTENTION
If you use the boot configuration file from PCMCIA, you must rename the file to
pcmboot.cfg The boot.cfg file is no longer saved in PCMCIA. The file is saved
only in flash.

Web management

The Nortel Ethernet Routing Switch 8600 includes a Web management
interface you can use to monitor your switch through a Web browser from
anywhere on your network. The Web interface supports many of the same
monitoring features as the Device Manager software.
For information about configuration requirements and instructions to install
the help files, to enable the Web server using Device Manager, and to
access the Web interface, see Nortel Ethernet Routing Switch 8600 User
Interface Fundamentals, NN46205-308.

Device Manager

Device Manager is an SNMP-based graphical user interface (GUI) tool
designed to manage single devices. To use Device Manager, you must
connect to a management station running Device Manager in one of the
supported environments.
For information about Device Manager installation and startup, see
Nortel Ethernet Routing Switch 8600 User Interface Fundamentals,
NN46205-308.
Copyright © 2008 Nortel Networks
.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Device Manager 29