Nortel COMMISSIONING 8600 Commissioning page 57

Table 9
Job aid: Setup utility prompt descriptions (cont'd.)
Prompt
Do you want to enable CPU
High Availability mode [n]
(y/n)?
Do you want to enable
vlan-optimization-mode support
[n] (y/n) ?
Do you want to enable r-mode
support [n] (y/n) ?
Do you want to enable FTP [n]
(y/n)?
Do you want to enable
RLOGIN [n] (y/n)?
Copyright © 2008 Nortel Networks
.
Configuring the switch with the setup utility 57
Description and action
Description: Specifies if you want to enable
CPU high availability (HA) mode. Use CPU
HA mode to recover switches with two CPUs
quickly from a failure of one of the CPUs. In
HA mode (hot standby), you synchronize and
configure the two CPUs in the same mode, so
they are compatible.
Action: Specify y to enable CPU high
availability (HA) mode. Accept the default (n),
to not enable CPU HA mode.
Description: Specifies if you want to enable
support for the VLAN optimization mode.
Action: Specify y to enable VLAN
optimization mode support. Accept the
default (n) to not enable VLAN optimization
mode support.
Description: Specifies if you want to enable
support for the R mode support.
Action: Specify y to enable R mode support.
Accept the default (n) to not enable R mode
support.
Description: Specifies if you want users to
access the switch by File transfer Protocol
(FTP).
Action: Enter y to enable FTP for remote
users. Accept the default (n) to not enable
FTP.
Description: Specifies if you want to access
the switch by Rlogin.
Action: Enter y to enable Rlogin for remote
users. Accept the default (n) to not enable
Rlogin.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008