Table of Contents
Advertisement
130 Common procedures using the CLI
Variable
file
<value>
mode <cli|nncli>
savetype
standby
<value>
verbose
Copyright © 2008 Nortel Networks
.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Value
Specifies the file name in one of the
following formats for value:
•
[a.b.c.d]: <file>
•
peer/<file>
•
/pcmcia/ <file>
•
/flash/ <file>
file is a string of 1–99 characters.
Saves the configuration as CLI or
NNCLI.
Specifies what information to save.
Possible values for this parameter are:
•
config
•
bootconfig
•
log
•
trace
•
clilog
•
snmplog
Saves the specified file name to the
standby SF/CPU in the following
format for value:
•
filename, /pcmcia/ <file>
•
/flash/ <file>
file is a string of 1–99 characters.
Saves the default and current
configuration. If you omit this
parameter, the command saves
only parameters you change.
Advertisement
Table of Contents
