Nortel COMMISSIONING 8600 Commissioning page 53

Table 7
Job aid: PPP file options (cont'd.)
Option
pap_restart <value>
pap_user_name <name>
passive_mode
proxy_arp
remote_auth_name <name>
require_chap
require_pap
silent_mode
vj_max_slots <value>
Table 8 "Sample PPP file" (page 53)
file.
Table 8
Sample PPP file
passive_mode
lcp_echo_interval 30
lcp_echo_failure 10
require_chap
require_pap
no_vj
ipcp_accept_remote
login
Copyright © 2008 Nortel Networks
.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Connecting a modem 53
Description
Configures the timeout, in seconds,
for PAP negotiation to the value you
specify.
Configures the user name for PAP
authentication with the peer to the
specified name.
Configures passive mode. PPP waits
for the peer to connect after an initial
connection attempt.
Adds an entry to the Address
Resolution Protocol (ARP) table
with the IP address of the peer and the
Ethernet address of the local system.
Configures the remote name for
authentication to the specified name.
Requires CHAP authentication with
peer.
Requires PAP authentication with
peer.
Configures silent mode. PPP does
not transmit LCP packets to initiate a
connection until it receives a valid LCP
packet from the peer.
Configures the maximum number of
VJ compression header slots to the
value you specify.
shows example contents from a PPP