Enabling The Web Management Interface - Nortel COMMISSIONING 8600 Commissioning

Variable
Trap Port
Listen for Syslogs
Confirm row deletion
Default Read Community
Default Write Community

Enabling the Web management interface

Start the Web management interface to provide management access to
the switch using a Web browser.
Procedure steps
Step
1
2
3
4
5
6
7
8
Copyright © 2008 Nortel Networks
.
Action
From the Device Manager menu bar, select Edit, Chassis.
The Chassis dialog box appears with the System tab displayed.
Click System Flags.
Select the EnableWebServer box.
Click Apply.
Click Close.
From the Device Manager menu bar, select Security, Control
Path, General.
Click Web.
Complete the ROUserName and ROPassword fields to specify
the user name and password for access to the Web interface.
All Web pages are read-only pages. You use the other fields
to specify the path and file name for the Web Help files and to
assign the number of rows in the Web display.
Nortel Ethernet Routing Switch 8600
Commissioning
NN46205-319 01.01 Standard
30 May 2008
Enabling the Web management interface 101
Value
The number of the port where the
switch captures trap messages. The
default is 162.
If you select this variable, Device
Manager monitors for syslogs.
If you select this variable, Device
Manager sends a message after you
delete a system table row.
The default Read Community type.
The default Write Community type.
--End--