Interface Management; Syntax; Parameters; Command Mode - Nortel Contivity1510D Reference

interface management

This command is used to specify the IP address that is used to connect to
systemfor the services such as HTTP, FTP, SNMP, and Telnet. The IP address
cannot be used for any other purpose.

Syntax

interface management
ip address address
exit

Parameters

address

Command mode

Global configuration

Next command mode

Interface configuration

Warnings

IP Address is already in use on switch for other purposes.
The IP address that is used to connect to system services on the
switch
Reference for the Contivity VPN Switch Command Line Interface
Chapter 2 CLI Command Summary 69